Scollop Clam Shell

Clam Shell

• This ceramic shell dish was hand sculpted in the Kedjebe studio using various clay bodies and glazes.

• This product was created as a soap holder or jewellery dish, however I leave the creativity for it’s use in your hands.

• The screw holes on this piece is for functional use as it can be wall mounted.

• The clay is sealed with an iridescent glossy glaze, to keep the magic of the sea alive in your home. 

Considerations

• Each product varies in thickness, weight and colour, each being hand made.

• Product colours and textures may appear slightly different to the image pictured depending on the lighting surrounding the product. This product has been pictured under natural light in order to produce a true representation.

Dimensions & Weight

• Please allow for slight variations on measurements and weights.

• 13cm length x 17cm width x 13cm height

• 730g weight

Recommendations:

• If you choose to wall-mount the product, ensure you follow correct guidelines regarding the material you choose to install the product on. Ensure you choose the correct wall anchors for your wall-type.

• Safely wall-mount this product by transferring the exact hole spacing to the wall by holding the piece to the wall (check the piece is level), tracing the holes with a pencil. Pre drilling the holes then gently drilling the screws through the holes of the product into the pre drilled holes, leaving the screw heads slightly exposed so the ceramic hangs flush without cracking.

• Do not over-tighten screws against ceramic, as direct pressure can crack the material. If needed, add small rubbers or felt bumpers to the back edges to protect the wall.

Care & Cleaning

• Simply wipe down with a cloth or scrub with detergent. Not suitable for the dishwasher.